CPPA-G AM(Tech)/MTO(Tech) mcq's

[Sadam baloch]

Technical Questions
1. Which method is used for stability analysis?
2. What is the ratio of amplitude of response to that of the input called?
3. When ___________ contacts are actuated, they disrupt the power supply through them
4. The type of memory which is fast and temporarily stores the data which are immediately required for use is called as
5. How is the speed of operation of conventional relay system as compared to digital controllers
6. The capability of convention relay systems for complex operations is ___________ that of the PLCs .
7. How is the noise immunity of PLCs to electrical noises as compared to that of conventional relay controllers?
8. Micro-controllers are ________________ than the PLCs
9. Digital to Analog Conversion is ______________ Analog to Digital Conversion.
10. According to Nyquist theorem, the sampling rate should be _________ as fast as the highest frequency of the signal being measured or sampled.
11. Data acquisition of all the physical quantities in the real world is done in
12. What is/are the maximum number of arrow/s (Input/s) allowed to go inside the block?
13. A corresponding block of an element is drawn by inserting ________ of that element inside the block.
14. The displacement of a mass attached to a spring in mechanical system is corresponding to _______ in the electrical system
15. ______ is the curve plotted between input and output by giving known inputs to an instrument and obtaining corresponding outputs.
16. The process of establishment of a relationship between the input to the instrument and output from the instrument is called as_____
17. The study of relationship between the input and output, when the input is invariant with respect to time is called as__
18. Arrange the following components of temperature measurement system according to measurement system
19. The controller characteristics for on-off controller follow _________
20. On-off Control is also called as
21. When the output is bounded for bounded inputs, then the system is said to be_______.
22. Which of the following is/are the Continuous Control Mode/s used in control systems?
23. What is the formula for thermal capacitance?
24. The phenomenon of storing heat energy in a system is called as thermal______.
25. __________ of PLCs can be done in very little time
26. PLC can be ___________ in plant to change the sequence of operation.
27. The PLC is used in _______.
28. Which of the following cannot be an input that is given to the PLC?
29. Which module of data acquisition system (DAQ) consists of the CPU that controls the complete data acquisition system
30. The capacity of data acquisition system (DAQ) can be specified in terms of______
31. A group of components which can complete certain tasks or achieve certain desired results in a desired manner while working together is called as_____
32. What is the input of the data acquisition system (DAQ) to which a transducer is connected called?
33. Which of the following cannot be considered as data in Data Acquisition System (DAQ)?
34. Data acquisition is the process in which, physical variables from the real world are_____
35. In which stage the measurement system comes in contact with the measurand or the quantity to be measured?
36. hat is used to make considerable simplification in the devices such as watches and cameras etc. as compared to pure mechanical designs?
37. The mechatronics is an interdisciplinary field in which the disciplines those act together are _________

General Quations
1. Don is a river of
2. capital of Saudi arabia
3. benazeer became _____ PM in 1988
4. bahamas Capital_____
5. tarbela can store how much water____
6. which book was written by data gunj bux____
7. How many rukus in Surah Hajj_____
8. Hoah was sent to which country___
9. afghan Official and most spoken language_____
10. who started shudhi movement____
11. Ahmad shaheed started war against____
12. sulphur is found in_____
13. malam jabba is realted to____
14. hazrat hamza was martyred by____
15. badar battle happened in which hijri ______
16. how many ashra mubashra became muslim by Hazrat Abu Bakr.
17. fatherless prohpet_____
18. which prophet made wallets_____
19. which prophet spoke to birds.____
20. hajj was first started from which prophet______
21.